News
What are the precautions for using a hydrogen peroxide disinfection machine?
Hydrogen peroxide disinfection machine, as an efficient terminal disinfection method, has a good killing effect on various airborne pathogenic microorganisms. Widely used in various biosafety laboratories, intensive care units (ICUs), negative pressure transfer vehicles and other medical places, it has played a very good role in disinfection and sterilization in the prevention and control of various infectious diseases.
1. The sterilization space of a single host can reach at least 550 cubic meters;
2. AC220V 22V power supply, frequency 50Hz 1Hz, power 2500 w;
3. Adopting a dual screen control system, it can be controlled through the built-in LCD screen. Standard PC software can be controlled by a remote computer control system. A remote computer can simultaneously control at least three single point generator devices;
4. The hydrogen peroxide disinfection machine has wireless or wired communication function, which can communicate with remote monitoring terminals through terminal routing. The upper computer software can remotely and real-time monitor sterilization status, temperature and humidity, hydrogen peroxide concentration and other information; Monitoring data can be output and printed in file format;
5. The device host is equipped with temperature, humidity, and hydrogen peroxide concentration probes, which can adjust the injection rate of disinfectant in real time according to the indoor temperature, humidity, and hydrogen peroxide concentration during sterilization; External multi-point temperature and humidity collection sensors and hydrogen peroxide concentration sensors can also be selected to verify and record the sterilization effect.
6. Built in weighing module, which can control the total spraying amount of the sterilization process, avoiding the phenomenon of over spraying and under spraying leading to unsatisfactory sterilization effect;
7. It has printing function, which can print the current working status and temperature and humidity information in real time during sterilization, so as to query the working status after sterilization;
8. The device itself has the function of exporting USB data, which can export and store corresponding sterilization records.
The hydrogen peroxide disinfection machine is a special type of sterilizer that is small in size and can work continuously. But there are some precautions when using it.
(1) Cooling
If maintained for a long time, the temperature will begin to decrease. Usually, cooling is achieved by directly turning off the heating switch, but the sterilization cover cannot be opened directly. Please wait until the temperature drops below 40 degrees. To use the rapid cooling method, immediately open the air outlet and cover it with a wet towel.
(2) Thermal insulation
The insulation process has also been disinfected. At this time, it is important to pay attention to the low temperature and not lower it than the specified value, usually between 120-22 degrees Celsius, and keep it warm for half an hour. The temperature of the hydrogen peroxide sterilizer is very high during insulation. Wear gloves during operation. What issues should be noted when using a hydrogen peroxide sterilizer? To avoid burns, it is necessary to check the parameters and timing of the needle. Adjustable thermal switch for insulation process. By adjusting the exhaust gas, a certain temperature can be maintained. When adjusting, it is firm and fine tuned.
(3) Heating up
Before heating, a certain amount of water must be checked inside the hydrogen peroxide disinfection machine. Check if the sterilizer is wrapped in kraft paper and if the bottle mouth is placed on top, which is very important for ensuring that the disinfection cover is properly closed, especially if the washing machine is clean in the ditch. If the mat is not neat, steam leakage may occur and there will be no disinfection effect. That's not safe. When the temperature rises to 90 degrees, close the ventilation opening for heating.